Parallel roof installation with SRMS

 

Our sloping roof mounting system made of aluminium, called SRMS, can be used for all types of slope roofs with standard tiles.  

 

The main components are stainless steel rafter anchors to secure the substructure on the roof, aluminium shaped rails to hold the solar panels and module-related small parts for fixing the solar generators. The modules are mounted vertically side by side and can be arranged in several rows.

At first, the tile must be moved to the side so that the rafter anchor can be hung at the rafter. To fix it the anchor is directly screwed on the rafter. Then the upper tile can be put back and the shaped aluminium rails can be fixed on the protruding ends of the hooks.

 

Before installing the solar modules on the roof two small hooks for each module should be fastened at the pre-drilled module frame. Later on, the solar modules are hung on these hooks into the rails. With this, a horizontal alignment of the solar modules is possible since the modules can slide within the rail. The first and the last module of a row are fixed with two z-angle profiles each, whereas the other modules are fastened to the aluminium rail by module clamps.

 

Our substructure offers the opportunity to take out single modules in case of maintenance work without disassembling all modules of the relevant solar generator part.

 

To avoid long installation hours all component parts are ready to use. The length of the rails are customised according to your number of modules.